What is Vibration Monitoring System?

A vibration monitoring system is a set of tools used to measure one or more parameters to identify changes along machinery life. Monitoring these parameters help identifying early faults like imbalance, bearing faults, looseness among others. New Vibration Monitoring Systems with wireless transmission and long battery life are now replacing the industrial wired accelerometers all over the world.

Sometimes it is just too difficult to place sensors and wires all the way from a machine to a control room. Wireless sensors can be placed anywhere within the range.

Low Cost
If you have a PDA or a celular phone, you easily understand why going wireless is much more cost effective than wires. Cabling long distances can be quite expensive compared to wireless sensors.

Certain places on machines are simply not accessible with wires. Wireless Sensores might be a solution for that.

The signal from the Phantom sensors is encrypted which ensures the reliability of the information and the security of your data

Introducing our Vibration Monitoring System | Phantom
Phantom is a Wireless Vibration Monitoring System that integrates other parameters such as temperature, current, RPM and speed into a single diagnosis system. In addition, our sensors have a battery life that lasts enough to take up to 100,000 measurements and they are very easy to install.

Equally important, Phantom can send data to a local database or to our cloud-based system, EIAnalytic. At any moment, you can keep track of your machinery using any device such as a smartphone, computer or tablet.

Vibration Monitoring System Easy to Install
Use you cellphone as a Vibration Analyzer: Our triaxial wireless sensor is able to connect to iOS and Windows devices. You can make recordings and FFT analysis on 4 simultaneous channels with our vibration analysis app WiSER Vibe. Furthermore, connect your WiSER 3x directly via WiFi, it requires NO receiver!

– New – Modbus Universal Communication
Phantom Wireless Sensors include now Modbus TCP/IP which is a widely known and used universal communication protocol for industrial applications. Thus, making them compatible with any PLC, Scada system or any other Modbus TCP/IP communicating software. Applications:
• Minimum mass: 50 grams
• Maximum mass: 30 kg
• Residual Unbalance: 2 mg
• Speed: 800 – 15,000 RPM
• Type: Soft Bearing

Phantom Temperature Sensor
We added wireless temperature sensors dedicated to measure extreme temperatures.

Infra Red Sensor, contactless: Range: -50° to 350° C
Module converter, Type K Thermocouple: Range of -210° to 1800° C